欢迎来到上海华蓝化学科技有限公司网站!
产品详情

Silwet L-77

描述:Silwet L-77

更新时间:2017-09-23
产品型号:
厂商性质:经销商
详情介绍

中文名称: Silwet L-77
产品别名: silwet L-77
英文名称: SILWET L-77
CAS编号:  
EC编号:  
MDL编号:  
分子式:  
分子量:  

 

 订货信息
产品编号 规格 包装 价格 品牌
    10ml 350 GE

 

 

备注:我公司提供产品均为科研试剂,仅供科学研究使用,不得用于临床、食用及其他用途,谢谢您的配合!

订购: 

性能描述 技术资料
Silwet L-77 is a chemical mixture of polyalkyleneoxide modified heptamethyltrisiloxane (84%) and allyloxypolyethyleneglycol methyl ether (16%). It is an essential infiltration media ingredient for all Agrobacterium-based transformations of Arabidopsis and other plants.10 mL and 35 mL are sufficient quantity to prepare 33 L and 115 L of vacuum infiltration medium when used at the recommended rate of 0.03%, v/v, respectively.


SILWET L-77 is a unique surfactant designed to improve the spreading

and wetting properties of pesticide spray mixes. SILWET L-77 utilizes

unique organosilicone chemistry which provides the most complete

coverage possible. SILWET L-77 can improve cuticular penetration of

plant surfaces by the spray mix. Optimum application and resultant

effects can be influenced by many factors. Consequently, it is

recommended that careful observation of the spray deposit be made and

adjuvant rates adjusted accordingly. Applications should be made to

ensure thorough coverage without excessive run-off.

TYPICAL PROPERTIES

Physical appearance Clear, light amber liquid

Pounds per gallon 8.370

Specific gravity 1.0 - 1.01

pH (1.0%) 6.0 - 7.0

Freeze Point less than 35 degrees F

Surface Tension (0.125% v/v) less than 25 dynes/cm

Contact Angle (0.125% v/v) less than 5 degrees F

Draves Wet Time (0.125% v/v) less than 15.0 seconds

GENERAL PRODUCT INFORMATION

(1) SILWET L-77 contains organosilicone surfactants designed to

provide superior wetting and coverage.

(2) SILWET L-77 can improve water penetration of hard to wet soils

and provide more uniform distribution of applied moisture.

(3) SILWET L-77 is generally compatible with pesticides and

fertilizer solutions.

(4) SILWET L-77 may cause excessive foam if not properly added to the

spray tank. To minimize foam generation, add SILWET L-77 to the

tank after all other ingredients are added. If foaming is still

a concern, add an antifoaming agent, such as FOAMBUSTER or COMBAT

PLUS to the tank prior to adding SILWET L-77.

(5) Do not allow spray mixes containing SILWET L-77 to sit over 36

hours.
 

留言框

  • 产品:

  • 您的单位:

  • 您的姓名:

  • 联系电话:

  • 常用邮箱:

  • 省份:

  • 详细地址:

  • 补充说明:

  • 验证码:

    请输入计算结果(填写阿拉伯数字),如:三加四=7
Copyright © 2024 上海华蓝化学科技有限公司(www.hualanchem.net) 版权所有